• 15/A BHANDARI STREET,
  • OPP. 1ST KUMBHARWADA, MUMBAI: 400004
  • +91(22)-67439165
  • mahir@solitaireoverseas.com

A334 GR 1 Heat Exchanger/ Condenser Tubes

LTCS A334 Grade 1 Heat Exchanger Tubes, ASME SA334 Gr.1 Low Temperature Carbon Steel Heat Exchanger Tubing, A334 Grade 1 Carbon Steel Condenser Tubing, A334 Gr.1 Condenser Tube, A334 Gr.1 Carbon Steel Heat Exchanger Tubes Manufacturer in India.

Solitaire Overseas recently emerges firm and they have a great deal of potential with a good quality workforce. It takes pride in our aptitude to supply a field of A334 GR 1 Heat Exchanger / Condensor. Its service and customer embrace is our way of raising a strong alliance with our company. A warm exchanger is a part of utensils used to transfer heat among 2 or more fluids. There are 3 primary classifications of heat exchangers according to their stream arrangement. In parallel-flow heat exchangers, the two fluids go into the exchangers at a similar end and travel in parallel to one a different to the other side. In counter-flow heat exchangers, the fluids enter the exchangers from conflicting ends. The countercurrent plan is the most efficient, in that it can transfer the main heat from heat average per unit mass due to the fact that the regular temperature difference along any unit length is higher.
A condenser is a unit which used in between air conditioning systems of course has a heat exchangers part to cool down and condense received refrigerant vapor into the liquid a compressor to raise the pressure of the refrigerant and move it along, and a fan for blowing exterior air through the heat exchangers part to cool the refrigerant inside. In this heat exchangers section, the refrigerants go through multiple tube passes, which are enclosed by heat transfer fins from side to side which cooling air is able to circulate from the external surface to inside the unit.

A334 Grade 1 Heat Exchanger/ Condenser Tubes

LTCS A334 Grade 1 U bend Heat Exchanger Tubes, Carbon Steel ASTM A334 Gr 1 Heat Exchanger & Condenser Tubes Suppliers in Mumbai, ASTM A334 Gr.1 LTCS Regenerative Heat Exchanger, ASME SA334 Gr.1 Low Temperature Carbon Steel Shell and Tube Heat Exchanger Exporters in India.

ASTM A334 Heat Exchanger/Condenser Tubing

A/SA 178 Heat Exchanger Tubes Exporter in Mumbai, A334 Gr 1 Carbon Steel Heat Exchanger Tubes, LTCS A334 Gr 1 U bend Tubes, A334 Gr.1 Straight Tube Heat Exchangers, A334 Gr.1 Carbon Steel Heat Exchanger U Tubes, LTCS A334 Gr 1 Industrial Heat Exchanger Tubes, LTCS A334 Grade 1 ERW Condenser tubes, .

Carbon Steel SA334 Heat Exchanger Tubes

Testing’s:
Mechanical Testing Such as tensile of area, Resistance Test, Chemical Analysis, Positive Material classification, Flattering Test, Micro, and Macro Test, Pitting conflict Test, Flaring Test, Intergranular decay Test.
Packaging:
Low-Temperature Carbon Steel A334 Grade 1 Heat Exchanger Tubes can be furnished bare or covered and with capped ends. Pipes up to 3 OD will be complete in bundles. In order to prevent rust through sea shipment bundles of carbon steel grade, b pipe can be wrapped with polypropylene sheets, and protected with flat steel bands. Over 3 OD force be supplied loose.

Low Temperature Carbon Steel ASTM A334 Grade 1 Condenser Tube, LTCS A334 Gr 1 Welded Heat Exchanger Tubes Stockist, Low-Temperature Carbon Steel A334 Gr.1 Tube Heat Exchanger Tubes, Low-Temperature A334 Grade 1 Heat Exchanger & Condenser Tube, ASME SA334 Gr 1 Carbon Steel Electric-Resistance-Welded Condenser Tubes Supplier in Mumbai, India.

Specification

Specifications

ASTM A334 / ASME SA334
01

Dimensions

ASTM, ASME and API
02

Size (mm)

6.35mm o.d to 101.60mm o.d
03

Outer Diameter

10-90 mm
04

Wall Thickness

1-15mm
05

Length

Max 12000mm
06

Surface Treatment

Oiling, Passivation, Phosphating, Black painting, Varnish
07

Ends

Plain end or beveled end, square cut, burr free ,Plastic Cap at Both end
08

Process

Hot-Finished, Cold-Finished, Cold drawn, Cold rolled, Hot Rolled
09

LTCS A334 Grade 1 Heat Exchanger / Condenser Tubes Chemical Composition

Grade C max Mn P max S max
1 0.30 0.40-1.06 0.025 0.025

Low-Temperature A334 Gr 1 Heat Exchanger & Condenser Tubing Mechanical Properties

min YS KSI [MPA] min TS KSI [MPA] El (%)
30 [205] 55 [380] 35

LTCS A334 / SA334 Gr 1 Heat Exchanger and Condenser Tube Application

A334 Grade 1 Heat Exchanger and Condenser Tubes in various Application Industries
  Air Preheater Unit
  Steam generating Boiler
  Power Generation
  Economiser
  Heat Exchangers
  Electric Power Plants
  Fossil Fuel Plants
  Water Supply Systems
  Waste Heat Plants
  Cogeneration Facilities

 

Searches Related to A334 Gr 1 LTCS Heat Exchanger / Condenser Tube

a334 gr 1 welded condenser tubes, astm sa 334 gr 1 ltcs heat exchanger tube price, ltcs a334 gr 1 heat exchanger tube bending, a334 grade 1 low temperature carbon heat exchanger tubes distributors in india, a334 gr 1 ltcs heat exchanger tube supplier, astm a334 / asme sa334 low temperature carbon steel heat exchanger tubing, astm a334 grade 1 ltcs condenser tube, a334 gr1 heat exchanger tubing dimensions, a334 gr 1 condenser erw carbon steel tube, a 334 gr 1 heat exchanger tubes chemical composition, a334 gr 1 ltcs adiabatic wheel heat exchange, sa334 grade 1 electric-resistance-welded carbon steel condenser tubes, a334 gr 1 heat exchanger tube specification, carbon steel astm sa334 gr1 ltcs condenser tubes stockists in mumbai, a334 gr 1 ltcs heat exchanger tubes mechanical properties, low temperature a334 gr 1 erw heat exchanger tube, a334 gr 1 heat exchanger tube and shell, astm a334 grade 1 heat exchanger tubes, astm a334 gr 1 ltcs heat exchanger and condenser tubes dealers, a334 grade 1 low temperature carbon steel cold drawn heat exchanger tubes traders.