Carbon Steel Welded Pipe Fittings Manufacturer and Supplier

Solitaire Overseas produces carbon steel welded pipe fittings from fusion welded (ERW or EFW) pipe and hot rolled plate, manufactured in ASTM A234 Grade WPB and WPC to ASME B16.9 dimensions. Welded construction is a proven, cost efficient route for larger diameter fittings, where the longitudinal seam is qualified through radiographic examination and does not compromise the service requirement. Covering NPS 1/2 inch to 48 inch across standard schedules, our welded range includes elbows, tees, reducers and caps, each supplied with full mill test certification and weld seam inspection records.

Carbon Steel Welded Pipe Fittings Specifications

ParameterSpecification
StandardASTM A234 WPB/WPC (welded construction)
Base MaterialFusion welded pipe (ERW/EFW) or plate
Dimensional StandardASME B16.9
Size RangeNPS 1/2" to 48"
Wall ThicknessSCH 10 to XXS
Weld Seam InspectionRadiographic or ultrasonic examination per ASTM A234
TestingHydrostatic test, radiography, PMI on request
CertificationMill Test Certificate EN 10204 3.1, 3.2 on request

Types of Carbon Steel Welded Pipe Fittings

  • 90° and 45° Elbows (long and short radius) from welded pipe
  • Equal and Reducing Tees from welded pipe or plate
  • Concentric and Eccentric Reducers from welded pipe or plate
  • Caps and Crosses from welded pipe or plate

Need seamless construction for a critical service line?

See our Carbon Steel Seamless Pipe Fittings range, or contact our team to confirm which construction fits your specification.

Technical Data

Chemical Composition (%)

GradeC maxMnP maxS maxSi min
WPB0.300.29 – 1.060.050.0580.10
WPC0.350.29 – 1.060.050.0580.10

Mechanical Properties

GradeTensile Strength (MPa)Yield Strength min (MPa)Elongation min (%)
WPB415 – 65524022 (17 for plate-made fittings)
WPC485 – 65527522 (17 for plate-made fittings)

Base Material Standard Reference

Base Material StandardConstructionTypical Use
ASTM A53 Grade B (ERW)WeldedGeneral utility and structural piping
ASTM A672 (EFW from plate)WeldedLarge diameter process and utility lines
ASTM A106 Grade B (seamless)SeamlessCritical, high temperature service (see our Seamless Pipe Fittings range)

Applications of Carbon Steel Welded Pipe Fittings

  • Water and utility pipelines
  • Municipal water and utility networks
  • Structural piping
  • General process lines
  • Large diameter fittings

Welded vs Seamless Fittings - Which to Choose

Welded and seamless fittings share the same ASTM A234 grade family but differ in base pipe route and typical cost. Use this table to decide.

CriteriaWelded FittingsSeamless Fittings
Base MaterialFusion welded pipe (ERW/EFW) or plateSeamless pipe, no weld seam
Typical CostMore cost efficientHigher
Diameter AvailabilityWell suited to large diametersAvailable across full size range, common in smaller/critical sizes
Typical Use CaseGeneral utility, large diameter, structural pipingCritical, high integrity service
Learn MoreThis pageCarbon Steel Seamless Pipe Fittings

Frequently Asked Questions

When manufactured and inspected to ASTM A234, welded fittings meet the same mechanical property requirements as seamless; the difference lies in the base pipe manufacturing route, not the finished fitting's certified strength.

Water treatment, general utility piping and large diameter structural or process lines commonly specify welded construction fittings for cost efficiency.

The longitudinal seam in the parent pipe or plate is qualified through radiographic or ultrasonic examination before fabrication, and the finished fitting is tested to the same ASTM A234 mechanical requirements as seamless construction.

Welded fittings can be used in high pressure service provided the grade, schedule and weld seam inspection level satisfy the project's piping class; check your governing specification before finalizing the order.

MOQs vary by size and schedule; share your bill of materials with our sales team for a size wise quotation and lead time.

Yes, third party inspection and EN 10204 3.2 certification can be arranged on request in addition to the standard 3.1 mill test certificate.

Need seamless construction instead?

See our Carbon Steel Seamless Pipe Fittings range, or contact Solitaire Overseas for welded fittings pricing.