ASTM A860 WPHY 46 Pipe Fittings Manufacturer & Supplier

ASTM A860 WPHY 46 Pipe Fittings Manufacturer and Supplier in India

ASTM A860 WPHY 46 Pipe Fitting is a high yield carbon steel, fit type for reliable service in pipeline and pressure piping where resistance to cracking is a critical factor. These fittings are manufactured to ASTM A860 and MSS SP-75 and come in elbows, bends, tees, reducers, crosses, caps, stub ends and more. WPHY 46 has a minimum yield strength of 46 ksi, and a tensile strength of 60 ksi, which is the mechanical strength needed for challenging piping applications. They can be fabricated, seamless or welded and made in various sizes and dimensions. Typical applications for these fittings include oil and gas, petrochemical, power generation and fluid transportation systems. Solitaire Overseas is a trusted WPHY 46 Pipe Fittings Manufacturer and Supplier in India, and provides quality pipe fitting for industrial use.

Technical Data

Specifications Chemical Composition Mechanical Properties

Specifications of ASTM A860 WPHY 46 Pipe Fittings

Parameter	Details
Product	MSS SP-75 ASTM A860 WPHY 46 Elbow
Size Range	Seamless: 1/2" – 30" Welded: 12" – 72" (or per customer requirements)
Elbow / Bend Degree & Radius	Degrees: 22.5°, 30°, 45°, 90°, 180° Radius: 1.0D, 1.5D
Thickness / Schedule	SCH10, SCH20, SCH30, STD, SCH40, SCH XS, SCH80, SCH160, SCH XXS
Standards	ASME B16.9, MSS SP-75
Material Grades	Carbon Steel: ASTM A234 WPB, A234 WPC, A420 WPL6, etc. Stainless Steel: ASTM A403 WP304, 304L, 316, 316L, 321, etc. Alloy Steel: ASTM A234 WP12, WP11, WP22, WP5, WP9, WP91, etc. Pipeline Steel: ASTM A860 WPHY 46

Chemical Compositions of ASTM A860 WPHY 46 Pipe Fittings

Grade	C	Mn	P	S	Si	Ni	Cr	Mo	Cu	Ti	V	Cb	Al
WPHY 46	0.20	1.00–1.45	0.03	0.01	0.15–0.40	0.50	0.30	0.25	0.35	0.05	0.10	0.04	0.06

ASTM A860 WPHY 46 Pipe Fittings Mechanical Properties

Grade	Tensile Strength (MPa)	Yield Strength (MPa)	Elongation	Max. Hardness
WPHY 46	435–605	315	≤32%	22 HRC (235 HBW)

Applications and Industrial Uses of ASTM A860 WPHY 46 Pipe Fittings

Oil & Gas Transmission Pipelines
Natural Gas Distribution Pipelines
Oil Pumping Stations
Gas Compressor Stations
Metering & Regulating Stations
Oil & Gas Gathering Systems
Refineries & Petrochemical Plants
Power Generation Piping Systems

Frequently Asked Questions

What are ASTM A860 WPHY 46 Pipe Fittings?

ASTM A860 WPHY 46 Pipe Fittings are high-yield carbon steel butt-weld fittings used in high-pressure pipeline and piping systems.

What is the difference between ASTM A860 WPHY 46 and API 5L X46?

WPHY 46 specifies pipe fittings, while API 5L X46 specifies line pipe. Both have a minimum yield strength of approximately 46 ksi, but they are covered by different standards.

Are ASTM A860 WPHY 46 fittings suitable for high-pressure applications?

Yes. They are designed for high-pressure piping and pipeline applications when the appropriate size, material, and design requirements are selected.

Can ASTM A860 WPHY 46 fittings be welded?

Yes. They can be welded using suitable welding procedures and compatible filler materials.

Are ASTM A860 WPHY 46 fittings seamless or welded?

They are available in seamless, welded, and fabricated forms, depending on the fitting type and manufacturing requirements.

How are ASTM A860 WPHY 46 fittings tested and inspected?

They are typically inspected through dimensional checks, visual inspection, mechanical testing, chemical analysis, and non-destructive testing (NDT) as required by the applicable specification.